ADVERTISEMENT

Refrigeration Planning for Brewpubs Adding a Food Menu

A grilled steak on a wooden board with rosemary leaves on top, flanked by a cold draft of beer.

An atmosphere surrounding the beer service might seem quite full when you add sandwiches, salads, or a small plate. Ingredients must have somewhere to hang and be stored, staff must have room to prepare, and somebody must get the right ingredients in an emergency when the bar is busy. Outline before purchase what the menu requires the people to do and where they will do it, with respect to a refrigerator.

Start With the Menu and the Work It Creates

Write down every ingredient that needs refrigeration, then group those ingredients by how they will be used during outdoor food service. A packaged item held until service creates a different task from vegetables that arrive whole, are prepared in batches, and are accessed repeatedly while orders come in.

Note delivery days, preparation times, and the periods when food and beer orders peak together. This exercise turns a proposed menu into a picture of what must be stored, what needs frequent access, and what can remain in backstock.

Separate Food Storage From Beverage Backstock

A beverage cooler may already be full of cans, garnishes, or bar supplies, with staff opening it throughout a shift. Adding food ingredients to that routine can make both teams search through a crowded cabinet. 

Identify the stock needed at the food station and the stock that can stay farther from service, then assign each group a sensible location. Separate storage may make access easier, but the decision should follow your foodservice program, the available space, and the equipment’s intended use rather than a blanket rule that every taproom needs the same setup.

Map the Route From Delivery to Service

Sketch a basic layout and track the journey of an ingredient from the delivery door to the storage area, and finally to where a plate comes off the assembly line. 

On the same drawing, indicate the busiest ways of the bar. An appealing empty plan that might seem convenient, but could block a doorway if the door of the refrigerator stayed open, or make it difficult for a cook to cross a bartender’s line when ordering for every table. There are a number of activities that can’t fit into the space, like unloading deliveries, working next to an open cabinet, and cleaning around equipment, so there is still space when the taproom is loaded.

Choose Equipment Around the Actual Job

The Restaurant Warehouse carries commercial refrigeration; comparing its selection of Atosa refrigerators can help an operator identify cabinet formats to assess against the planned storage and service tasks. For example, start from the inside, not just the outside, when considering dimensions. Review the containers, packaged items, and shelving organisation that will be required by the menu and check to see if frequently used items can be accessed by staff without the constant need to move backstock. A cabinet that fits the wall yet still creates trouble for access can cause a problem with the services.

Then, hook the suggested position to a door, with the door unlocked, if possible. Examine the space of door swing or drawer travel against nearby counters, walkways, and the space where someone will stand while working. Check that manufacturer’s instructions for installation match reality on site: for example, ventilation clearances and access for service. Electrical needs, accessing the building, and space for moving a unit into position must be considered in the same assessment. Having all of that information contained in one floor plan would help ensure that a choice was made based on footprint rather than an empty and closed decision.

Imagine who will be using each cabinet during an average shift. People may still converge on the same door if there is an obvious location where they can fetch all of their needed ingredients for cooking, and the bar staff can get their needed drinks, and so on. Go through a peak hour together with the people who will be working during this time. Their input will let you know if something else, like a different space or cabinet layout, would make tasks easier.

Check Local Food Rules Before Buying

A food menu also changes the questions an operator needs to take to the appropriate food-control authority. The FDA Food Code is a model that jurisdictions use when developing or updating foodservice rules; it does not automatically apply as one uniform set of requirements to every taproom. The rules under which the proposed operation will be conducted can be provided by state, local, or tribal authorities. Provide them with a description of the menu and the way food is to be stored, prepared, and served to match their planned food service activities.

Make sure to inquire about all requirements prior to any purchase that relate to refrigerated storage, equipment, and the design layout. The answer can determine what kind of food is allowed to be handled on the job, which details of installs to attend to. 

So avoid having that discussion before a refrigerator salesperson begins talking about products: Product categories don’t imply whether a specific food operation is suitable for the area. Checking early is more beneficial to an operator first introducing food into their system, rather than after equipment has been delivered and an outcome layout is in place.

Build a Simple Opening Checklist

Before ordering equipment, turn the brewpub menu and floor plan into a short working checklist. It must be unambiguous enough that anyone who is planning the preparation, running the beer service, or arranging the beer can see the same decisions. Useful questions include:

  • Menu and inventory: what ingredients will require cold storage, what ingredients will be ready to eat, and what ingredients, if any, will be prepared in advance to be eaten?
  • Daily flow: Who receives deliveries, when does it take place, and what items are need to get again as orders are in?
  • Space and access: Do cabinets need to be installed for only half the height, or can their doors be opened to access?
  • An assessment of installation and maintenance: Do the instructions for installing and maintaining the equipment match the site, and can staff access the equipment with ease for routine cleaning and maintenance?
  • Local review: Has the appropriate authority reviewed the planned food operation and informed them of the requirements that apply at this food operation?

Within the answers, the measurement should be evident on a drawing rather than being distributed in several answers. On that drawing, include receiving, storage, prep a, nd serving, and then do the walk-through as if the kitchen and bar are active. Staff is faced with the refrigerator being left open or having to stop frequently to get to “the regular ingredient” when locating the food station? Consider changing around the layout prior to buying the necessary equipment. That small planning exercise gives a brewpub or taproom a clearer basis for facility upgrades, including refrigeration that supports the new menu without getting in the way of the beer service already in place.

Share or leave a comment

Conversations (0)

Replying to comment


No comments yet.